INA129SHKQ Overview

Op amps are INSTRUMENTATION AMPLIFIER types of amplifier on the chip. It comes in a Rail/Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 8 terminations over the past year. In this case, there are 8 pins on the board. Please take in mind that op amp should be run at 15V. It should be noted that this type of buffer amplifier is exactly what is known as a Instrumentation Amplifier device. 8 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 25μV. You can run this op amp ic on 700μA . Op amp is a member of the 80dB's 80dB family. Instrumentation amplifier has 1 channels on it. Using this buffer op amp requires a temperature of at least -55°C. It is recommended that op amp be used at temperatures below 210°C. It is possible to count 3 elements on this buffer amplifier. With regard tp supply voltage, op amp is used under 36V. The linear amplifier's supply voltage should be higher than 4.5V. There should be a dual supply voltage of 18V for you to conduct this electrical part. Linear amplifier has a quiescent current of 2mA. The op amp resistance should stay within the range of 10GOhm.

INA129SHKQ Features

8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm

INA129SHKQ Applications

There are a lot of Texas Instruments
INA129SHKQ Instrumentational OP Amps applications.

• Proportional operation circuits
• Inverse/same-phase proportional circuit
• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits