INA131BP Overview

Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. An op amp of this type is a Instrumentation-type. The op amp is delivered to you in a Tube case. A total of 8 pins are located on this board. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. The buffer op amp includes 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 50μV. Through Hole is the recommended mounting type of operational amplifiers. With regard to operating temperature, this op amp functions well at -40°C~85°C. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.2mA and 10 . The buffer amp consists of 1 circuits in total. 2.2mA quiescent currents are flowing through buffer op amp. In order for the buffer amplifier resistance to remain within the 10GOhm range, the device should be tested. A total of 3 instrumentation amplifiers are present on the device.

INA131BP Features

8 Pins
supply voltage of 15V
Resistance of 10GOhm

INA131BP Applications

There are a lot of Texas Instruments INA131BP Instrumentational OP Amps applications.

• Displayers for aircraft and air transportation control systems
• Home audio systems
• Measurements of Wheatstone bridge
• Instrumentation
• Addition operation circuits
• Signal transformation
• Television
• Integrator circuits
• Industrial applications including automation
• Switching amplifier