INA132UA/2K5 Overview

A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. An op amp ic of the Differential type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. There have been a total of 8 terminations over the past year. Linear amplifier has a total of 8 pins. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. 8 pins are available on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 750μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . Using a supply current of 160μA , this buffer op amp will be able to operate. It is recommended to keep the voltage gain at 0dB at all times. There are a total of 1 channels available on the op amps. For the operating supply voltage of the op amp ic, there is a rating of 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. 160μA quiescent currents are flowing through buffer op amp. During testing, the buffer amplifier resistance should remain within a range of 80kOhm. This linear amplifier also utiliANALOG CIRCUITes an analog IC known as a ANALOG CIRCUIT. As an extra benefit of this operational amplifier ic, please refer to IT CAN ALSO OPERATE WITH 2.7V TO 36V SINGLE SUPPLY.

INA132UA/2K5 Features

8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm

INA132UA/2K5 Applications

There are a lot of Texas Instruments INA132UA/2K5 Instrumentational OP Amps applications.

• Addition operation circuits
• Communication device
• ECG equipment
• Non-polarized electrodes
• Signal filtering
• Portable electronic products powered by batteries
• Voltage regulation circuit
• RF cable systems
• Test and measurement instruments
• Signal transformation