INA133UA/2K5 Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. There should be no change in the voltage gain at 0dB. There are 1 elements in this buffer amplifier. An buffer amplifier is packed in a TR-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 950μA. The quiescent current is 950μA. It is important that the op amp resistance stays within the range of 50kOhm.

INA133UA/2K5 Features

8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 50kOhm

INA133UA/2K5 Applications

There are a lot of Texas Instruments
INA133UA/2K5 Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering