INA133UE4 Overview

In the package, you will find a SOIC-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 750μV as input offset voltage. Using an 950μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 0dB for the time being. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 1 elements make up the design of this buffer amplifier. The linear amplifier is packaged by using a TUBE axis. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part. The current is quiescent at 950μA. During testing, the instrumentation amplifier resistance should remain within a range of 50kOhm.

INA133UE4 Features

8 Pins
supply voltage of 5V
0dB voltage gain
Resistance of 50kOhm

INA133UE4 Applications

There are a lot of Texas Instruments
INA133UE4 Instrumentational OP Amps applications.

• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video computer boards