INA155UA/2K5G4 Overview
There is a SOIC case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the INSTRUMENTATION AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape and Reel case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. There are two types of Instrumentation Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 1mV. The buffer amplifier is capable of operating from a supply current of 1.7mA . It is recommended to keep the voltage gain at 33.98dB at all times. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -65°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 150°C. The total number of elements in this buffer amplifier is 2. Under 5.5V is the minimum supply voltage for this electric component. Over 2.7V is a recommended supply voltage for buffer amps1.7mA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 10 TΩ range, the op amp should be tested.
INA155UA/2K5G4 Features
8 Pins
supply voltage of 5V
33.98dB voltage gain
Resistance of 10 TΩ
INA155UA/2K5G4 Applications
There are a lot of Texas Instruments
INA155UA/2K5G4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
