INA163UA Overview

Packaged in a 14-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. The instrumentation amplifier in this picture is of the Instrumentation-type. Linear amplifier is delivered in a Tube case. There is a growing number of terminations approaching the number of 14. Linear amplifier has a total of 14 pins. This linear amplifier should be powered by an 15V battery. It has 14 pins that make up the linear amplifier. Op amp rates 250μV as input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using a supply current of 10mA , this buffer op amp will be able to operate. Voltage gain should remain at 80dB. There are 1 circuits on this op amp. For the operating supply voltage of the op amp ic, there is a rating of 3. The operating supply voltage of the buffer op amp is rated at 36V. There is a quiescent current of 10mA in this operational amplifier circuit. Instrumentation amplifier resistance should stay within the range of 60MOhm.

INA163UA Features

14 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 60MOhm

INA163UA Applications

There are a lot of Texas Instruments INA163UA Instrumentational OP Amps applications.

• earphone
• Active probe
• Radar
• Power generator
• Commercial audio systems
• Scintillation detectors
• Radiation thermometry transducers
• Comparator
• Gaming industry
• Fission chambers