INA168QPWRQ1 Overview

There is a package called Tape & Reel (TR) that contains buck boost converter.Voltage regulator is packaged in the way of 8-TSSOP (0.173, 4.40mm Width).The current regulator is mounted by Surface Mount.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.As an input voltage, you will be able to input a voltage equal to 2.7V~60V.A 8 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 8 termination.There are two types of INA168s in this family.8-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.Using Surface Mount as a mounting system, this current regulator is mounted.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum voltage of 60V that can be supplied to the buck boost converter is supported.Operational Amplifier is a part that includes these current regulations, all of which are included in one part.The buck boost converter operates with a minimum supply voltage of 2.7V.The Automotive, AEC-Q100 series of FPGAs fall into this category.This electrical buck boost converter has an amplifier type of OPERATIONAL AMPLIFIER, which is a type of amplifier.

INA168QPWRQ1 Features

Tape & Reel (TR) package
INA168 family
The maximal supply voltage of 60V
Automotive, AEC-Q100 series

INA168QPWRQ1 Applications

There are a lot of Texas Instruments INA168QPWRQ1 Current Regulation/Managements applications.

• Over-current protection
• Programmable current source
• Over current monitor
• Over-current measurement
• Suspension controls
• Power management
• Motor controls
• Smart battery packs
• Current sensing
• DC motor control