INA199A3RSWR Overview

Package Tape & Reel (TR) includes buck boost converter.10-UFQFN is the way in which voltage regulator is packaged.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.The input voltage of -0.3V~26V can be supported by this voltage regulator.An example of this is the 10 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Among the INA199 family of products.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.This current regulator is mounted by Surface Mount.In order for the constant current to work, it should be powered by a 5VV power source, which is found in most 5VV power supplies.IC POWER SUPPLY SUPPORT CIRCUIT is the power converter's analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.The maximum voltage of 26V that can be supplied to the buck boost converter is supported.It operates with the minimal supply voltage of 2.5V.When 65μA reaches, it receives its operating supply current.As soon as the maximum supply current (Isup) supplied for current regulation's operation reaches 5mA, it will cease to function.Current regulation consists of 1 elements.In a current regulation, 46.02dB voltage gains are the simple ratio between the output voltage and the input voltage.

INA199A3RSWR Features

Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V
1 elements

INA199A3RSWR Applications

There are a lot of Texas Instruments INA199A3RSWR Current Regulation/Managements applications.

• Engine management
• Over-current protection
• Battery chargers
• Automotive current measurement
• Suspension controls
• Vehicle dynamic controls
• Power management
• Industrial applications current measurement
• DC motor control
• Power supply current measurement