INA199B1QDCKRQ1 Overview

In package Tape & Reel (TR), buck boost converter is included.In the way voltage regulator is packaged, voltage regulator is in the form of a 6-TSSOP, SC-88, SOT-363.This electronic part is mounted in the way of Surface Mount.There should be no temperature above -40°C~125°C at the time of operation.Voltages of -0.1V~26V can be input as input voltages in this module.A 6 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.Moreover, current regulator is part of the INA199 family.6-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.There is a Surface Mount mounting bracket on the back of this current regulator.The constant current should work as long as it is powered by a 5VV power source, and therefore must be plugged into a 5VV outlet.There is a part called Operational Amplifier which contains all of these current regulations.This type of FPGA is found in the Automotive, AEC-Q100, Zero-Drift series.This electrical buck boost converter uses a OPERATIONAL AMPLIFIER amplifier type.It reaches 65μA when the operating supply current is supplied.

INA199B1QDCKRQ1 Features

Tape & Reel (TR) package
INA199 family
Automotive, AEC-Q100, Zero-Drift series

INA199B1QDCKRQ1 Applications

There are a lot of Texas Instruments INA199B1QDCKRQ1 Current Regulation/Managements applications.

• Level translating
• Power management
• Over-current measurement
• Current sensing
• DC motor control
• Over-current protection
• Programmable current source
• DC-to-dc converters
• Over current monitor
• Smart battery packs