INA202AQDGKRQ1 Overview

Buck boost converter is part of the package Cut Tape (CT).In the way voltage regulator is packaged, voltage regulator is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).Mounted by Surface Mount, this current regulator is a semiconductor.Temperatures should not exceed -40°C~125°C during operation.An input voltage wcurrent regulatorh a value of -16V~80V may be used as an input voltage.A 8 termination can be defined as a terminating voltage regulator which matches the characteristic impedance of a line, which allows a transmission line to be terminated with a voltage regulator matching its characteristic impedance.INA202 family is associated with current regulator.As part of a signal interface in a computer or other communication constant current regulator, 8 pins are pronged contacts.It is mounted by Surface Mount on this current regulator.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.18V's maximum supply voltage can be supported by this buck boost converter.Part Operational Amplifier consists of these current regulations as well as other current regulations.This buck boost converter is designed to operate with a minimal supply voltage of 2.7V as its input voltage.This type of FPGA is represented by the Automotive, AEC-Q100 series.It has an Amplifier type of OPERATIONAL AMPLIFIER.

INA202AQDGKRQ1 Features

Cut Tape (CT) package
INA202 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series

INA202AQDGKRQ1 Applications

There are a lot of Texas Instruments INA202AQDGKRQ1 Current Regulation/Managements applications.

• Over current monitor
• Power management
• Current sensing
• Automotive current measurement
• DC motor control
• Vehicle dynamic controls
• Battery management
• Suspension controls
• Over-current protection
• Transmission controls