INA203AQPWRQ1 Overview

In package Tape & Reel (TR), buck boost converter is included.Depending on how 14-TSSOP (0.173, 4.40mm Width) packages voltage regulator, voltage regulator will be packaged in the same way.Surface Mount mounts this current regulator.The operating temperature should not exceed -40°C~125°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.14 terminations are treated as terminations of transmission lines that use a voltage regulator with the characteristic impedance of the line as the means to terminate the transmission line.Moreover, current regulator is part of the INA203 family.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. There is a Surface Mount mounting bracket on the back of this current regulator.In order for the constant current to work, it should be powered by a 12VV power source, which is found in most 12VV power supplies.Its maximum design flexibility is due to the output current of 1mA.Compared to the last few years, the number of channels has grown strong/weak: 2.As a result, it allows 18V to be supplied with its maximum voltage.In order to include these current regulations, there is a part called Operational Amplifier that includes them.It operates with the minimal supply voltage of 2.7V.There are FPGAs of this type in the Automotive, AEC-Q100 series.An amplifier of this type is COMPARATOR.

INA203AQPWRQ1 Features

Tape & Reel (TR) package
INA203 family
The maximal supply voltage of 18V
Automotive, AEC-Q100 series

INA203AQPWRQ1 Applications

There are a lot of Texas Instruments INA203AQPWRQ1 Current Regulation/Managements applications.

• Battery chargers
• Suspension controls
• Over current monitor
• Over-current measurement
• Over-current protection
• Diesel injection controls
• DC-to-dc converters
• Transmission controls
• DC motor control
• Engine management