INA204AIDR Overview

Buck boost converter is embedded in the Tape & Reel (TR) package.A package in the way of 14-SOIC (0.154, 3.90mm Width) is used for voltage regulator.The current regulator is mounted by Surface Mount.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.In the case of 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.There is a INA204 family member who is related to current regulator.There are 14 pins, which are pronged contacts as part of a signal interface in a computer or other communications constant current regulator. The current regulator is mounted on the Surface Mount axis.There is no reason why the constant current cannot work as long as it is powered by a 12VV power source.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.Supports the maximum supply voltage of 18V.Operational Amplifier, which is a part that contains all of these current regulations, is included in this part.In order for it to operate, 2.7V has to be the minimum supply voltage.The Amplifier type of this electrical buck boost converter is COMPARATOR.A power supply 12V is required to operate current regulation.

INA204AIDR Features

Tape & Reel (TR) package
INA204 family
The maximal supply voltage of 18V
12V power supplies

INA204AIDR Applications

There are a lot of Texas Instruments INA204AIDR Current Regulation/Managements applications.

• Programmable current source
• Over current monitor
• Battery chargers
• DC-to-dc converters
• Over-current measurement
• Power supply current measurement
• DC motor control
• Transmission controls
• Automotive current measurement
• Over-current protection