INA207AIPW Overview

Buck boost converter is part of the package Tube.Voltage regulator is packaged in the way of 14-TSSOP (0.173, 4.40mm Width).Surface Mount mounts this current regulator.In order to ensure the correct operation of the system, the temperature should not exceed -40°C~125°C.Current regulator is possible to use a voltage input of -16V~80V for the input.In the case of 14 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.Current regulator belongs to the family INA207.In computers and other communications constant current regulators, 14 pins are pronged contacts that form part of a signal interface.Surface Mount is responsible for mounting this current regulator.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.In addition to the maximum design flexibility that 1mA provides, its output current is also quite high.The maximum supply voltage of 18V is supported by it.There is a part called Operational Amplifier which contains all of these current regulations.In order for it to operate, 2.7V has to be the minimum supply voltage.It has an Amplifier type of COMPARATOR.It reaches 2.8mA when the operating supply current is supplied.Power is provided by 12V power supplies.

INA207AIPW Features

Tube package
INA207 family
The maximal supply voltage of 18V
12V power supplies

INA207AIPW Applications

There are a lot of Texas Instruments INA207AIPW Current Regulation/Managements applications.

• Over current monitor
• Automotive current measurement
• Smart battery packs
• Battery chargers
• Programmable current source
• Motor controls
• Power management
• Current sensing
• Battery management
• Power supply current measurement