INA208AIDGSR Overview

Buck boost converter is embedded in the Tape & Reel (TR) package.In this case, voltage regulator has been packaged in the same way as 10-TFSOP, 10-MSOP (0.118, 3.00mm Width).Mounted by Surface Mount, this current regulator is a semiconductor.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.There is a support for voltages of -16V~80V as input voltages for this voltage regulator.A 10 termination is a method of terminating a transmission line, in which a voltage regulator is used that matches the impedance of the transmission line in order to terminate the line with a 10 termination.There are two types of INA208s in this family.In a computer or other communication constant current regulator, 10 pins are pronged contacts that provide a signal interface.There is a Surface Mount mounting bracket on the back of this current regulator.The constant current should work as long as it is powered by a 12VV power source, and therefore must be plugged into a 12VV outlet.The output current of 1mA makes it a very flexible power converter when it comes to design.As a result, it allows 18V to be supplied with its maximum voltage.As a result, these current regulations are included in a part called Operational Amplifier, which consists of these current regulations.With the minimal supply voltage of 2.7V, it is capable of operating.This electrical buck boost converter has an amplifier type of COMPARATOR, which is a type of amplifier.Current regulation operates from 12V power supplies.

INA208AIDGSR Features

Tape & Reel (TR) package
INA208 family
The maximal supply voltage of 18V
12V power supplies

INA208AIDGSR Applications

There are a lot of Texas Instruments INA208AIDGSR Current Regulation/Managements applications.

• Current sensing
• Over-current measurement
• Smart battery packs
• Transmission controls
• DC motor control
• Programmable current source
• Power supply current measurement
• Battery management
• Over current monitor
• Automotive current measurement