INA300AIDSQR Overview

There is a package called Tape & Reel (TR) that contains buck boost converter.A package in the way of 10-WFDFN Exposed Pad is used for voltage regulator.Surface Mount is used to mount this current regulator on the board.Current regulator is recommended that the operating temperature not exceed -40°C~125°C.Current regulator is possible to use a voltage of 2.7V~5.5V as an input voltage.In the case of 10 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.There are two types of INA300s in this family.10-pins are pronged contacts that form part of a computer's or other constant current regulator's signal interface.The current regulator is mounted on the Surface Mount axis.If a 3.3VV power source is used as a power source to power the constant current, it should be able to function.Strong/weak growth of channels: 1.The maximum voltage of 5.5V that can be supplied to the buck boost converter is supported.There are several current regulations that are included in the Comparator part, which is part of the entire assembly.With the minimal supply voltage of 2.7V, it is capable of operating.An amplifier of this type is COMPARATOR.

INA300AIDSQR Features

Tape & Reel (TR) package
INA300 family
The maximal supply voltage of 5.5V

INA300AIDSQR Applications

There are a lot of Texas Instruments INA300AIDSQR Current Regulation/Managements applications.

• Automotive current measurement
• Vehicle dynamic controls
• Motor controls
• Over-current protection
• Battery chargers
• Level translating
• Industrial applications current measurement
• Current sensing
• Engine management
• Over current monitor