INA302A2IPW Overview

Buck boost converter is embedded in the Tube package.14-TSSOP (0.173, 4.40mm Width) has packaged voltage regulator in this manner.The current regulator is mounted by Surface Mount.There should be no temperature above -40°C~125°C at the time of operation.Current regulator is possible to use a voltage input of 0V~36V for the input.In addition to the 14 termination, there are a number of terminations that are used, which are achieved by terminating a transmission line with a voltage regulator that matches the characteristic impedance of the line.Among the INA302 family of products.In computers and other communications constant current regulators, 14 pins are pronged contacts that form part of a signal interface.If a 5VV power source is used as a power source to power the constant current, it should be able to function.Channels are becoming stronger/weaker based on the following statistics: 2.Part Comparator consists of these current regulations as well as other current regulations.This electrical buck boost converter uses a COMPARATOR amplifier type.

INA302A2IPW Features

Tube package
INA302 family

INA302A2IPW Applications

There are a lot of Texas Instruments INA302A2IPW Current Regulation/Managements applications.

• Suspension controls
• Diesel injection controls
• DC-to-dc converters
• Engine management
• Vehicle dynamic controls
• Motor controls
• Current sensing
• Over-current measurement
• Programmable current source
• Automotive current measurement