INA326EA/2K5 Overview

In the package, you will find a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case to contain the op amp ic. An op amp of this type is a Instrumentation-type. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. It consists of a total of 8 pins in total. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. 8 pins are located on the operational amplifiers. Op amp rates 100μV as input offset voltage. This electronic part is best mounted with type Surface Mount. With regard to operating temperature, op amp ranges -40°C~85°C. Using an 2.4mA supply current, this operational amplifier ics can be operated. 80dB should remain the voltage gain. The op amp ic has 1 channels on it. On the output type, there are Rail-to-Rail different types of op amps. As a result of this, the buffer amplifier is packed in TR. 2.4mA quiescent currents are flowing through buffer op amp. During testing, the instrumentation amplifier resistance should remain within a range of 10GOhm.

INA326EA/2K5 Features

8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10GOhm

INA326EA/2K5 Applications

There are a lot of Texas Instruments INA326EA/2K5 Instrumentational OP Amps applications.

• Signal operation
• Scintillation detectors
• Active probe
• Division circuits
• Integrator circuits
• Fission chambers
• High/low-pass filter circuit
• Band-stop filter
• Video data acquisition
• Portable electronic products powered by batteries