INA331IDGKT Overview

A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. Instrumentation-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be at least 8 terminations this year. There are a total of 8 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. There are 8 pins on this chip. As far as the input offset voltage is concerned, linear amplifier rates at 500μV. Surface Mount is the recommended mounting type of operational amplifiers. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 415μA and 10 . There should be no change in the voltage gain at 60dB. On the buffer amps, there are 1 channels that can be used. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. For the operating supply voltage of the op amp ic, there is a rating of 3. An buffer amplifier is packed in a TR-shape according to the design. The current is quiescent at 415μA. It is important to keep the resistance within the 10 TΩ range of the op amps.

INA331IDGKT Features

8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ

INA331IDGKT Applications

There are a lot of Texas Instruments INA331IDGKT Instrumentational OP Amps applications.

• pH (acidity)
• Non-polarized electrodes
• Semiconductor detectors
• Medical instruments
• Signal operation
• Thermocouples
• Instrumentation
• High-frequency data acquisition systems
• Proportional counter tubes
• Polarized electrodes