INA333SHKQ Overview

Packaged in a 8-CSOIC (0.220, 5.65mm Width) case, the buffer op amp is ready to use. Buffer amps of this type are called Instrumentation-types. The op amp is delivered to you in a Tube case. There have been a total of 8 terminations over the past year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A total of 8 pins are present on the instrumentation amplifier. Op amp rates 10μV as input offset voltage. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -55°C~210°C . It is possible to operate this buffer amplifier from a supply current of 50μA . 60dB should be the voltage gain. There are 1 circuits on op amps. On the output type, there are Rail-to-Rail different types of op amps. Op amp has total of 3 elements. There is a quiescent current of 198μA in this operational amplifier circuit. It is important to keep the resistance within the 100GOhm range of the op amps.

INA333SHKQ Features

8 Pins
supply voltage of 5V
60dB voltage gain
Output Type: Rail-to-Rail
Resistance of 100GOhm

INA333SHKQ Applications

There are a lot of Texas Instruments INA333SHKQ Instrumentational OP Amps applications.

• Gaming industry
• Instrumentation
• Fission chambers
• PDA
• Measurements of Wheatstone bridge
• Navigation
• Switching amplifier
• Micro signal measurement
• Television broadcasting equipment
• Active probe