INA338AIDGSTG4 Overview
The linear amplifier is packaged in a VSSOP case. This is a INSTRUMENTATION AMPLIFIER type op amp. Linear amplifier is delivered in a Tape and Reel case. The number of terminations approaches 10. Buffer amplifier has a total of 10 pins. Please take in mind that this instrumentation amplifier should be run at 5V. The buffer op amp includes 10 pins. Regarding input offset voltage, op amp rates 100μV. This op amp can operate from a supply current at 2.4mA. Voltage gain should remain at 80dB. The op amp ic has 1 channels on it. The temperature should not be lower than -40°C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125°C. This linear amplifier has a total of 3 elements. With regard to the supply voltage, this electrical component is capable of working from under 5.5V. It is advised to keep the op amp's supply voltage higher than 2.7V. Buffer amplifier has a quiescent current of 2.4mA. Instrumentation amplifier resistance should remain within the range of 10GOhm.
INA338AIDGSTG4 Features
10 Pins
supply voltage of 5V
80dB voltage gain
Resistance of 10GOhm
INA338AIDGSTG4 Applications
There are a lot of Texas Instruments
INA338AIDGSTG4 Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
