ISO121G Overview

It is packaged in an 40-CDIP (0.600, 15.24mm), 16 Leads-case that protects the operational amplifiers from damage. An op amp of this type is a Isolation-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 16 terminations this year. A total of 40 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 10mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -25°C~85°C. A supply current of 4mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 0dB. This op amp ic has 1 circuits. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. It is important that the op amp resistance stays within the range of 200kOhm.

ISO121G Features

40 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 200kOhm

ISO121G Applications

There are a lot of Texas Instruments
ISO121G Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering