JM38510/32301BCA Overview

CDIP case is available for the cut smart buffer. In case Rail/Tube, the cut smart buffer is available. A total of 14 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. There is a place for it in the way of Through Hole. On this board, there is a pin count of 14. In order for the timeing clock to operate, it is connected to the 14 pins. It is designed to operate at a minimum temperature of -55°C in order to maintain reliability. In order to ensure stable operation, the maximum operating temperature must be set to 125°C. The electronic gadget belongs to the LS family. An IC with a value of BUS DRIVER is used in order to achieve this. It is capable of handling a maximum supply voltage of 5.5V volts. As low as possible is the source voltage 4.5V, which can be used by the system to work. It is recommended that the supply voltage be kept at 5V for maximum efficiency. With the help of this gadget, it is also possible to obtain LG_MAX. This clock buffer is configured as a 1 bit device. It has 2 ports configured. The element has a total of 4 elements in it. A value of TTL is used in the configuration of the output.

JM38510/32301BCA Features

14 terminations
logic IC type of BUS DRIVER

JM38510/32301BCA Applications

There are a lot of Texas Instruments
JM38510/32301BCA Clock Buffers & Drivers applications.

• Clock signal level shifting
• High performance communication system
• Data center
• Cloud computing
• Network
• High speed industry
• High-end consumer electronics
• Data communication
• Telecommunications
• Computing