LM211QDRG4Q1 Overview

In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL is being used.We ship the part through Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.Electronic comparator is capable of performing numerous tasks when powered by 15V voltage.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.A total of 8 pins are included.A Surface Mount mounting type is recommended.A temperature setting of -40°C~125°C should be used for the operating temperature in order to prevent malfunctions.The comparator consists of 8 pins.Alternatively, you may search for LM211 to find more pin-to-pin solutions for your specific needs.There is 6mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be -5mA .A current supply greater than -5mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 100nA current into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .Comparator electronics is part of the Automotive, AEC-Q100 comparator series.The device is acceptable to pack by TR .

LM211QDRG4Q1 Features

DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 6mA
Voltage Gain: 106.02dB

LM211QDRG4Q1 Applications

There are a lot of Texas Instruments
LM211QDRG4Q1 linear comparators applications.

• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications