LM25061PMM-2/NOPB Overview

This is included in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package.At present, 1 channels are available.It's packaged in a Tape & Reel (TR) shape.Total terminations are 10.Device position DUAL is its terminal position.In total, there are 10 pins on it.A supply voltage of 12V can result in high efficiency.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application General Purpose is available on the device.As you can see in Auto Retry, it's featured.The device should be able to be powered by a 2.9V~17VV power source.There are numbers in the LM25061 family that include it.10 pins are used in operation.There are Current Limit, Fault Timeout, UVLO features that can be programmed.In the present, there is a shortage of 1.6mA.Positioned in direction of Surface Mount, it is at a right angle.Hot-swappable device is important that the supply voltage (Vsup) is kept above 2.9V for normal operation of the device.Hot Swap can operate at a maximum supply current of 2.4mA.By using this device, it is also possible to produce RESET THRESHOLD VOLTAGE IS 2.6 VOLT.

LM25061PMM-2/NOPB Features

The terminal position of 10
Features of Auto Retry
Programmable features of Current Limit, Fault Timeout, UVLO

LM25061PMM-2/NOPB Applications

There are a lot of Texas Instruments
LM25061PMM-2/NOPB hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies