LM25085MME/NOPB Overview

Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~42V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. It can switch at Up to 1MHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at DUAL . Different dc switching's functions can be applied to 8 terminations. A DC switcher's nominal voltage of 24V is input. You can find other relevant dc to dc converter ics by searching "LM25085". Pins number 8 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 42V voltage of DC regulator was detected in the test statistics. normally, the dc dc regulator's output current is 1.75A, which you should keep in mind when starting a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. Switching controller operates at a frequency of 1MHz. A dc switching in a dormant state uses 1.25mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 42V due to the dc switcher's maximum input voltage. The supply voltage must be 4.5V. There will be 1.75A output current greater than 1.75A from the dc switcher. At least 1.25V voltage is output by the voltage controller.

LM25085MME/NOPB Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %
Frequency: 1MHz

LM25085MME/NOPB Applications

There are a lot of Texas Instruments LM25085MME/NOPB DC to DC converter applications.

• Hydro power
• Driver circuits
• Laboratories
• Experimental setup
• Emergency lighting monitoring equipment
• Boring machines
• Current source circuits
• Computer monitoring equipment of building
• Series voltage regulation circuits
• Elevator lighting