LM25085QMYE/NOPB Overview

With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 4.5V~42V volts and has 4.5V~42V supply voltage. Worked in an dc switcher with a -40°C~125°C TJ rating. Switching can be done at Up to 1MHz with this switching controller. The Surface Mount makes it ideal for general dc dc regulator. Switching control is made easier with the dcdc regulator's Current Limit, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a DUAL terminal on the switching converters. 8 terminations with a variety of function. A DC switcher's nominal voltage of 24V is input. LM25085 can be used to locate other relevant dc to dc converter ics. There are 8 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Statistically, DC regulator outputs 42V volts. It's important to remember that the dc dc regulator's normaloutput current is 1.75A, so you should note it down when starting a new project. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator has a maximum frequency of 1MHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 42V. Basically, it's a dc to dc voltage regulator from the Automotive, AEC-Q100 series. In dormant mode, 1.25mA is used. Since the dc switcher's maximum input voltage is 42V, the voltage must be regulated accordingly. The supply voltage must be 4.5V. DC switcher will not be able to provide an output current above 10A volts. The switching converter can output 42V volts at its utmost, according to the datasheet. 1.25V voltage output is lower than 1.25V.

LM25085QMYE/NOPB Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Frequency Control
Max Duty Cycle: 100 %

LM25085QMYE/NOPB Applications

There are a lot of Texas Instruments LM25085QMYE/NOPB DC to DC converter applications.

• Hydro power
• Scientific testing
• Smart grid
• Electrical power transmission
• Fire elevators
• Sensitive electronic devices
• Terrestrial set-top boxes
• Mobile phones
• SMT equipment
• Surface processing equipment