LM25088QMH-2/NOPB Overview

The switching controller fits in the 16-PowerTSSOP (0.173, 4.40mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. A 4.5V~42V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 50kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Ramp, Soft Start which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 16 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 24V. Other relevant dc to dc converter ics will be returned if you search "LM25088". Total pins of switching converter are 16. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 4.5V as the minimum input voltage of dc dc voltage regulator. A 40V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 10A. The duty cycle of the voltage regulator dc to dc can be set to 97 % on power-up or power-down to ensure reliability. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 1MHz for this dc regulators. To operate the voltage regulator dc to dc safely and reliably, users should apply 42V. It belongs to the dc to dc voltage regulator series Automotive, AEC-Q100. During dormancy, the dc switching uses 3.2mA. Voltage 24V must be supplied. In order to ensure proper operation, the controller should not receive more current than 4.5mA.

LM25088QMH-2/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %

LM25088QMH-2/NOPB Applications

There are a lot of Texas Instruments
LM25088QMH-2/NOPB DC to DC converter applications.

• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools