LM25088QMHX-2/NOPB Overview

As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~42V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 50kHz~1MHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 16. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 24V. A search for "LM25088" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator must be 4.5V. Statistically, the DC regulator outputs 40V voltage. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 1MHz. A circuit should contain 42V in order to ensure the voltage regulator dc to dc runs safely and reliably. There are several dc to dc voltage regulator in the Automotive, AEC-Q100 series. As long as the dc switching is in a dormant state, it utilizes 3.2mA. The supply voltage should be 24V. You should not supply more current than 4.5mA to the controller.

LM25088QMHX-2/NOPB Features

Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION

LM25088QMHX-2/NOPB Applications

There are a lot of Texas Instruments
LM25088QMHX-2/NOPB DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery