LM2661MX/NOPB Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. In this voltage regulator, there are 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR CONVERTER-type IC. Space savings are achieved by placing this voltage regulator in the 8-SOIC (0.154, 3.90mm Width) package. There are 1 outputs configured on the voltage regulator. Adjusting voltage regulator's output pins generate Fixed output. This voltage regulator 12v fits the Surface Mount mounting. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 5kHz 40kHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 1.5V. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin Vin/2. The output current of 100mA makes dc to dc voltage regulator feature maximum design flexibility. A regulator with this 260 peak reflow temperature is essentially indestructible. To meet the switching regulator operation requirements, a nominal input voltage of 5V is provided. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. DC/DC regulators of this type are part of the LM2661 family of voltage regulator 12vs. A voltage of 11V volts can be generated by DC DC switching regulator. To operate the voltage regulator 12v, 8 pins are required. In order to ensure reliable performance, the dc to dc voltage regulator's minimum supply voltage is 1.5V volts. As long as the supply voltage is greater than 5.5V, the voltage regulator 12v will operate correctly.
LM2661MX/NOPB Features
1 outputs
Peak reflow temperature (Cel) of 260
8 pins
LM2661MX/NOPB Applications
There are a lot of Texas Instruments LM2661MX/NOPB Voltage Regulators applications.
- Laboratories
- Remotely powered electric motors
- Handheld GPS
- Automatic plug-in machines
- Gear/thread machining machines
- Network technology
- Drilling machines
- Balance equipment
- Photovoltaic power
- Low output voltage switching power supply circuits
