LM2903AVQDRQ1 Overview

The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.Output type of this comparator is CMOS, MOS, Open-Collector, TTL .The part is shipped by Tape & Reel (TR) .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type Differential .Currently, it consists of only 2 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search LM2903 for more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 1mA .An excess of current supply over 400μA could result in malfunction of the comparator.You are allowed to input a maximum current of 250nA into the device.The voltage gain of the part is indicated by 100dB in the voltage formula.The part belongs to the Automotive, AEC-Q100 series of comparator parts.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.

LM2903AVQDRQ1 Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 2.5mA
Voltage Gain: 100dB

LM2903AVQDRQ1 Applications

There are a lot of Texas Instruments
LM2903AVQDRQ1 linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices