It is included in the 8-DIP (0.300, 7.62mm) package. A component of this electronic system has been mounted in the direction of Through Hole. Packaged in a way consistent with Tube. An electrical device of this type is designated as Frequency to Voltage. Termination in 8 refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In addition, it is equipped with a pin count of 8. A supply voltage of 12V supplies power to the device. Parts that are related to the base part number can be identified. The 8 pins of a computer or other communication device are pronged contacts that provide a signal interface. The temperature at which the device operates must not exceed -40°C in order for it to ensure reliability. As a precaution, it operates at the maximum operating temperature of 85°C in order to maintain its reliability. A Through Hole mounting is used. This should be used if the supply voltage (Vsup) exceeds 12V. In this case, 28V is the maximum supply voltage (Vsup). A frequency of 5kHz is used for its operation. It is necessary to supply 25mA with a current so that it can fully perform its function. Support is provided for the output voltage of 8.3V. An electrical device of this type has a bandwidth of 10 kHz.
