LM2940CS-5.0 Overview

An Tube case is included with the delivery. The package is in a TO-263-4, D2Pak (3 Leads + Tab), TO-263AA case. As you can see, the IC chip has 3 terminations. Fixed is the output type of the Voltage Regulator IC. There are 1 regulators implemented in this electroic component. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. Default settings are set to 0°C~125°C degrees. In this case, the output function that is configured for this regulator IC is Positive. A total of 4 pins can be found on the board. The regulator has a total of 1 outputs to make sure that it delivers prompt, sufficient outputs. As far as its dropout voltage is concerned, it is 10 volts. Depending on the chip, 3 pins may be available. As an FYI, this IC voltage regulator has the basic part number LM2940. As you can see, this regulator IC represents a typical Other Regulators component. In order to meet the operation requirements, its maximal output current reaches 1A. It operates in the 15mA Quiescent Current state. An 26V-volt supply voltage at the top is required.

LM2940CS-5.0 Features

• 500mV dropout voltage

• Other Regulators subtageroy

LM2940CS-5.0 Applications

There are a lot of Texas Instruments LM2940CS-5.0 Linear Voltage Regulators applications.

• Hot swap controller

• Transmission

• SCP configurator

• LCD backlight

• Embedded systems

• Telecom and datacom applications

• HMI (Human-Machine Interface)

• CPU power supply

• Car lighting

• Ultrasound