LM306DRG4 Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Push-Pull, TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 12V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator consists of 1 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching LM306 .As a result, this comparator displays a quiescent current of 10mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 10mA when using the device.A supply current exceeding 10mA may result in the comparator malfunctioning.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 92.04dB .

LM306DRG4 Features

Push-Pull, TTL output capability
Differential IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 92.04dB

LM306DRG4 Applications

There are a lot of Texas Instruments
LM306DRG4 linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets