LM306P Overview

To facilitate transportation, it comes packaged in 8-DIP (0.300, 7.62mm) .There is a comparator of type Push-Pull, TTL output on this device.The chip is packaged with Tube .The device is designed with 8 terminations.The chip belongs to Comparator .A comparator supplied with 12V voltage can complete many demanding tasks.Electronic comparator can be classified as a Differential chip.The board includes 8 pins.Electronic comparator is recommended to mount using type Through Hole .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM306 .A quiescent current of 10mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normal operation of the device requires 10mA supply current.If the current supply exceeds 10mA , the comparator might be damaged.Input current to the device cannot exceed 40μA .The voltage formula shows that the part has a voltage gain of 92.04dB .

LM306P Features

Push-Pull, TTL output capability
Differential IC
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 92.04dB

LM306P Applications

There are a lot of Texas Instruments
LM306P linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators