LM311PWE4 Overview
In order to make transportation easier, it is packaged in TSSOP .A comparator with an output type of TTL is being used.As you can see, the comparator has8 terminals.Electronic comparator is capable of performing numerous tasks when powered by 15V voltage.In general, the chip type can be classified as General Purpose .A total of 8 pins are included.The comparator consists of 8 pins.There is 7.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 7.5mA .A current supply greater than 7.5mA may cause the comparator to malfunction.Electronic comparator is possible to input a maximum of 250nA current into the device.Comparator electronics follows that the voltage gain of the part is 106.02dB .In general, temperatures higher than 70°C are not recommended.Comparator electronics will not be able to function at temperatures below 0°C .A comparator's maximum supply voltage is 30V volts.Using a voltage as low as 3.5V is possible for this comparator.For the output quality to be maintained, 1 channels work together.A 50mA output current is specified for this device.
LM311PWE4 Features
TTL output capability
General Purpose IC
Quiescent Current: 7.5mA
Voltage Gain: 106.02dB
LM311PWE4 Applications
There are a lot of Texas Instruments
LM311PWE4 linear comparators applications.
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
- Wearable Devices
- Mobile Phones and Tablets
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
