LM3150MH/NOPB Overview

In the 14-PowerTSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 6V~42V volts and has 6V~42V supply voltage. Suitable for working in an dc switcher that has a -40°C~125°C TJ. It can switch at Up to 1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, On Time Control, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 14 terminations. This dc dc converter ic uses a variety of control techniques, including HYSTERETIC CURRENT MODE. There is a DC switcher's nominal voltage of 18V. In addition to "LM3150", there are other relevant dc to dc converter ics you can find. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 600mV voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 12A. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator1MHz has the maximum frequency. Hence, ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the SIMPLE SWITCHER® series. In dormant mode, 3.5mA is used. Since the dc switcher's maximum input voltage is 42V, the voltage must be regulated accordingly. Voltage 6V must be supplied. A voltage controller's lowest output voltage cannot be less than 600mV.

LM3150MH/NOPB Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, On Time Control, Soft Start
HYSTERETIC CURRENT MODE
ALSO HAS ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.6V; ALSO OPERATES IN VOLTAGE MODE

LM3150MH/NOPB Applications

There are a lot of Texas Instruments
LM3150MH/NOPB DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment