LM339ADRE4 Overview

To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Collector, TTL output on this device.The chip is packaged with Tape & Reel (TR) .The device is designed with 14 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a Differential chip.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search LM339 .A quiescent current of 2.5mA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 500μA supply current.If the current supply exceeds 500μA , the comparator might be damaged.This device requires 5V power supplies to operate.Input current to the device cannot exceed 250nA .The voltage formula shows that the part has a voltage gain of 106.02dB .Comparator electronics is acceptable to pack the device by TR .

LM339ADRE4 Features

CMOS, MOS, Open-Collector, TTL output capability
Differential IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM339ADRE4 Applications

There are a lot of Texas Instruments
LM339ADRE4 linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators