LM3404MR/NOPB Overview

There is a 8-PowerSOIC (0.154, 3.90mm Width) package on the board that is used to save space. LED drivers have a total of 1 outputs that are used in the design of the drivers.Surface Mount is used to mount the led driver.The system emerges as a DC DC Regulator with high efficiency.It is possible for the led driver ic to function normally at -40°C~125°C TJ.The benefits are considerable for Automotive, Lighting.In this case, the termination value is 8.It is configured with 8 pins as its base.It's mounted by Surface Mount.A base part number of LM3404 is associated with this LED driver.It is acceptable to operate with a supply voltage of 42V.In this device, the output voltage is 40V volts.A total of 8 pins are present on this device.The input voltage must be minimally 6V.The maximum efficiency can be achieved by operating it at a minimal voltage of 6V.42V is the maximum value of the supply current.Whenever the supply current is lower than 900μA, it can provide high efficiency.There is no current available to supply to the load.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.In the absence of external factors, 625μA current is consumed.If the output voltage exceeds 40V, it should be corrected.When using the device, there is a voltage of 24V volts assigned to the circuit.It maintains a voltage of 200mV at its minimum output.

LM3404MR/NOPB Features

Available in the 8-PowerSOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~125°C TJ
Switching frequency of 1MHz

LM3404MR/NOPB Applications

There are a lot of Texas Instruments LM3404MR/NOPB LED Driver ICs applications.

• Amusement Machines
• Gallery lighting
• Refrigeration lighting
• General lighting
• Down lights
• Portable lighting
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Replacement lamps
• OLED power supply for portable equipment
• LED Lighting PFCs, Linear Dimmable