LM3405XMK Overview

To save board space, it uses the SOT-23-6 Thin, TSOT-23-6 package. For the design of these LED drivers, 1 outputs are used.In order to mount the led light driver, Surface Mount is used.As a DC DC Regulator, it has high efficiency and reliability.It is capable of working normally at -40°C~125°C TJ.The benefits of Lighting are considerable.Based on the frequency of 1.6MHz, it operates on the basis of a pulse.For its operation, terminations with a value of 0 are used.To form its configuration, 6 pins are used.Undetermined failures can occur if the voltage supply is below 3V.On the Surface Mount, a device is mounted.It is under the base part number LM3405 that you can find this LED driver.An acceptable maximum value for the supply voltage is 15V.A 13.5V volt output voltage is provided by this device.The device has 6 pins.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.The current that can be supplied to the load is 1A.When using the device, there is a voltage of 12V volts assigned to the circuit.

LM3405XMK Features

Available in the SOT-23-6 Thin, TSOT-23-6 package
Operating temperature of -40°C~125°C TJ
Frequency of 1.6MHz

LM3405XMK Applications

There are a lot of Texas Instruments LM3405XMK LED Driver ICs applications.

• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Stage Lighting and Signage
• LED backlight driver for LCD displays for Tablets and Note PCs
• Down lighting
• Other Electronic Devices
• Gallery lighting
• Stage and Studio lighting
• Scanners and Handy Terminals
• Dimmable LED for vehicle interiors
• Architectural lighting