In order to save board space, the led driver uses the 24-WFQFN Exposed Pad package. This LED driver has 1 outputs.It is possible to mount the led driver using Surface Mount.In this case, the result is a DC DC Controller with high efficiency.It is possible for the led driver ic to operate normally at -40°C~125°C TJ.Backlight has considerable advantages.The frequency of 1MHz is used as the basis for its operation.It operates with terminations of 24.The configuration of the board is built around 24 pins.Failures may occur if the voltage supply is below 3V.There is a device mounted on the Surface Mount.LED drivers have a base part number of LM3433.The device has a pin count of 24.The voltage range of this device is optimized for a maximum supply voltage of 5.8V.It is also classified into Switching Regulator or Controllers according to its characteristics.You can supply 30A current to the load.In order for systems to function, a voltage of 0 is required internally.It's possible for this electronic component to fully function when the switching frequency is maintained at 500kHz.1mA current is consumed in the case of no external factors.6V is the voltage at the output terminal.The circuit is assigned 3.3V volts when the device is in operation.When the input voltage is greater than or equal to 3V, the operation of this device is greatly simplified.The input voltage should be kept below 5.8V to ensure high stability.
LM3433SQX/NOPB Features
Available in the 24-WFQFN Exposed Pad package Operating temperature of -40°C~125°C TJ Frequency of 1MHz Supply voltage of 3.3V Operating with the supply voltage of 14V Switching frequency of 500kHz Output voltage of 6V
LM3433SQX/NOPB Applications
There are a lot of Texas Instruments LM3433SQX/NOPB LED Driver ICs applications.
Other Electronic Devices
Street lighting
Replacement lamps
LED Lighting PFCs, Linear Dimmable
OLED power supply for portable equipment
Flicker-free LED Lighting using R1580N
Constant Voltage Power Source for portable equipment