LM3495MTC/NOPB Overview

This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 2.9V~18V. Work well in dc switchers with a -40°C~125°C TJ. It can switch at 200kHz~1.5MHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Tracking. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 16 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "LM3495". Total pins of switching converter are 16. Switching converter type is specifically Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 2.9V. According to the test statistics, DC regulator outputs 5.5V voltage. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 80 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. 500kHz is the frequency of the switching controller. DC switching uses 1.8mA when it is dormant. The supply current of the voltage controller is 1.8mA. An input of 1.8mA current flow could satisfy the operation of the switching converter .

LM3495MTC/NOPB Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Frequency Control, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 500kHz

LM3495MTC/NOPB Applications

There are a lot of Texas Instruments LM3495MTC/NOPB DC to DC converter applications.

• Hydraulic presses
• Remotely powered electric motors
• Experimental setup
• Servo drive system
• Smart grid
• Packaging
• Smoke prevention equipment
• Smoke exhaust equipment
• Electrical power transmission
• Computer application technology