LM3642TLE/NOPB Overview

The board's 9-WFBGA, DSBGA package saves space. The LED driver's design uses 1 outputs.Surface Mount is used to mount the led light driver.With high reliability and efficiency, this emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -40°C~85°C TA.There are considerable benefits for Camera Flash.On the basis of the frequency 4MHz, it operates.In this case, it operates with terminations of 0.There are 9 pins used to form the base of its configuration.It is possible that failures will occur if the voltage supply is below 2.5V.The number of segments is 1.As you can see, it is mounted by Surface Mount.It is under the base part number LM3642 that the LED driver can be found.There is no problem with the voltage of 5.5V.There is 5V voltage output from it.As a result, its characteristics can also be categorized as Display Drivers.1.5A is the maximum amount of current that can be supplied to the load.Absent external factors, there is 750μA consumption of current.

LM3642TLE/NOPB Features

Available in the 9-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 4MHz
Supply voltage of 3.6V

LM3642TLE/NOPB Applications

There are a lot of Texas Instruments LM3642TLE/NOPB LED Driver ICs applications.

• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• General lighting
• Gallery lighting
• Sports Facility Lighting
• Dimmable LED for vehicle interiors
• Flicker-free LED Lighting using R1580N
• Replacement lamps
• Industrial LED Lighting: Image Recognition Devices
• Medical surgery lighting
• Constant Voltage Power Source for portable equipment