LM3709XQBP-308/NOPB Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 9 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. There are 9-VFBGA functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 1.8V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Surface Mount. 9 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. To find similar IC managements from the manufacturer, you can always search by LM3709.

LM3709XQBP-308/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

LM3709XQBP-308/NOPB Applications

There are a lot of Texas Instruments LM3709XQBP-308/NOPB Voltage Supervisors applications.

• Detection of phase loss
• Stable power system
• Electric heating appliances
• DC stabilized power supply module
• External alarm
• Automotive power systems
• Unattended substation automation
• Multi-voltage system
• Leakage current detection
• Medical-specific insulation monitor