LM3711XKMM-463/NOPB Overview

This power management consists of 10 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. Power management consists of 2 channels, each of which can be used independently. In this IC management you will find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. This power management system has 10 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. If you want to search for similar IC managements of this manufacturer, you can always refer to LM3711, which is the base power ics number.

LM3711XKMM-463/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

LM3711XKMM-463/NOPB Applications

There are a lot of Texas Instruments LM3711XKMM-463/NOPB Voltage Supervisors applications.

• Fire equipment power monitoring system
• Military communications
• Power communication system
• Detection of phase loss
• Smartphones
• Battery cars
• Kitchen appliances
• Microprocessor system
• Magnetic resonance imaging
• Automotive power systems