LM3722EM5-3.08/NOPB Overview

Power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 3.3V. Power management conducts at a voltage of 1. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. If you want to search for similar IC managements of this manufacturer, you can always refer to LM3722, which is the base power ics number. There is a requirement for 3.3V power to power this power management.

LM3722EM5-3.08/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V

LM3722EM5-3.08/NOPB Applications

There are a lot of Texas Instruments LM3722EM5-3.08/NOPB Voltage Supervisors applications.

• Electrical fire monitoring system
• Battery cars
• Sensitive sensors
• Medical-specific insulation monitor
• Personal computers
• Electronics installed in the vehicle
• Transformer load monitoring equipment
• Set top box
• Power distribution systems of infant care room
• Microprocessor system