LM3724EM5-3.08/NOPB Overview

There are 5 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tape & Reel (TR) model. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3.3V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts IC management. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 1V for this power management. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using LM3724, the base power ics number. A maximum supply temperature of 10μA can be used.

LM3724EM5-3.08/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current

LM3724EM5-3.08/NOPB Applications

There are a lot of Texas Instruments LM3724EM5-3.08/NOPB Voltage Supervisors applications.

• Power distribution systems of ICU
• Personal computers
• Household appliances
• Satellite navigation
• Kitchen appliances
• Consumer electronics
• Functional modules
• Military electronics
• Urban rail transit weak current power monitoring
• Leakage protection