LM3724EM5-4.63/NOPB Overview

A total of 5 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. There is a supply current of 15μA for the power management. It is always advisable to use LM3724, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 5V volts of power. Voltage supervisor can work with a supply temperature of 15μA at the most.

LM3724EM5-4.63/NOPB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

LM3724EM5-4.63/NOPB Applications

There are a lot of Texas Instruments LM3724EM5-4.63/NOPB Voltage Supervisors applications.

• Important electronics for automotive safety
• Power distribution systems of operating room
• Magnetic resonance imaging
• Cloud computing
• Efficient information transmission
• Detection of phase sequence
• emergency room
• Digitally controlled LDO regulators circuit
• Multi-voltage system
• Military electronics