LM393DE4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of CMOS, MOS, Open-Drain, TTL is being used.Ready for shipping in Tube package.The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as Differential .Currently, it consists of only 2 elements.There are 8 pins on this board.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.This comparator has 8 pins.Search LM393 to find more pin-to-pin solutions.A quiescent current of 2.5mA is observed in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 500μA in order to use the device normally.A current supply greater than 500μA may result in the comparator malfunctioning.5/30V power supplies are enough to run the device.Electronic comparator is possible to input up to 250nA current into the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.
LM393DE4 Features
CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM393DE4 Applications
There are a lot of Texas Instruments LM393DE4 linear comparators applications.
- Power management
- Mobile Phones and Tablets
- Lithium ion battery monitoring
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Wide Range VCO; MOS Clock Timers
- Body Control Modules
- Infotainment & cluster
- Consumer Medical Electronics
- Self-diagnostics
