LM393PWG4 Overview

For convenience, it is packaged in 8-TSSOP (0.173, 4.40mm Width) .There is a CMOS, MOS, Open-Drain, TTL output type for this comparator.Electronic comparator is shipped by Tube .The comparator has a total of 8 terminals.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as Differential .Electronic comparator consists of 2 elements in total.Electronic comparator has 8 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching LM393 .As a result, this comparator displays a quiescent current of 2.5mA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 1mA when using the device.A supply current exceeding 500μA may result in the comparator malfunctioning.There is sufficient power to run the device from 5V power supplies.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 106.02dB .Comparator electronics is necessary to have an operating supply voltage of 28V for normal operation.

LM393PWG4 Features

CMOS, MOS, Open-Drain, TTL output capability
Differential IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

LM393PWG4 Applications

There are a lot of Texas Instruments
LM393PWG4 linear comparators applications.

• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets